![background image](http://html1.mh-extra.com/html/curtis/sno-pro-5fbmqa/sno-pro-5fbmqa_assembly-mounting-instructions_2699763005.webp)
5 of 14
Figure 4. Mount Trip Frame to Moldboard
Figure 5. Install Trip Springs
Tighten Locknuts on Eyebolts until
correct Spring tension is achieved
A
B
Install
End Caps
End Cap
Install Clevis Pin and secure with Cotter Pin
Note orientation of
Left and Right Clevis Pins
Trip Frame is attached to Moldboard
with 4 Clevis Pins in locations shown
1
2
3
4
TRIP FRAME
LEFT SIDE
TRIP FRAME
LEFT SIDE
MOLDBO
ARD
Looking down on Trip Frame
1" x 4"
Clevis Pin
Cotter Pin