FRONT END LOADER BLADES
For Tractor and Skid-Steer Loaders
Assembly & Mounting Instructions
Curtis Industries Inc. LLC, 111 Higgins St., Worcester, MA 01606 TEL: (800) 343-7676 FAX: (508) 854-3377 For Parts and information visit us at www.Curtisindustries.net
Curtis Industries Inc. LLC, reserves the right to change product design or specifications without notice or liability.
Curtis Snow Plows are protected by the following U.S. Patent Numbers: 6,145,222 and 6,209,231 Licensed under U.S. Patent Number 5,568,694 & Canadian Patent Number 2,137,853.
Other patents pending.
Do not attempt to install or operate Front End Loader Blade
without reading and understanding all Warnings and Instructions
in this Manual and on the Loader Blade.
WARNING
ALWAYS
travel at reduced speed when Loader Blade is attached.
ALWAYS
ensure Lift Chain (if used) is securely attached to Grab Hook.
ALWAYS
familiarize yourself with area to be plowed.
DO NOT exceed 10 mph when plowing snow.
DO NOT exceed 5 mph if obstructions could be encountered when plowing.
ALWAYS
lower Loader Blade to ground when not in use.
DO NOT position any part of your body under Loader Blade.
DO NOT use any part of your body when dislodging an obstruction from
Loader Blade Assembly.
DO NOT service Loader Blade in tripped condition. Dangerous release of
stored energy may result.
1 of 14
NOTE: Curtis F.E.L.B.’s are suited for installation on Tractors and Skid Steer Vehicles up to 47HP.
F.E.L.B. Standard Mount - Part Number 5FBMSB
F.E.L.B. Skid Steer Mount - Part Number 5FBMSS
F.E.L.B. John Deere Quick Attach Mount - Part Number 5FBMQA
Rev A October 11th, 2012
