E-<2>
OPERATING INSTRUCTIONS
TV OPERATION
1. Turn on Power Switch (5).
2. Slide the Function selector (6) to the “TV” position.
3. Slide the band selector switch (7) to a desired band
(VL/VHF/UHF).
4. Turn the tuning control (3) to a desired station on the tuning
indicator (1).
5. Adjust rod antenna (9) length, direction and angle to attain best
picture and sound.
6. Adjust the volume control (5) to a desired volume level.
7. Brightness control (14) & contrast control (13).
If the picture is too bright or too dark, adjust the brightness and
contrast control knobs.
8. If picture rolls up and down, adjust the vertical hold control (15).
RADIO OPERATION
1. Slide the function switch (6) to the “RADIO” position.
2. Slide the band selector (7) to a desired band AM/FM.
3. Turn the tuning control (3) to a desired station on the tuning indicator (1).
4. Adjust rod antenna (9) for best sound in the FM mode, turn the unit for best sound in
the AM mode.
5. Adjust the volume control (5) to a desired level.
CAUTION:
SLIDE THE POWER SWITCH (5) TO THE “OFF” POSITION FOR CLOSE
UNIT POWER SOURCE. REMOVE THE BATTERIES/CAR/AC ADAPTER SOURCE
IF THE UNIT NOT BEING USED FOR A LONG TIME.
