1
1
CD player
Operation
At the front of the CD micro system, or using
the remote control, press STANDBY, to switch
the CD micro system on. The LCD display will
light up.
Set the function switch to CD. The display will
initially flash zeros then show ‘no dISC’.
Only use CDs that bear the CD
logo.
Loading and Unloading CDs
1.
Press the PUSH OPEN button on the CD
door
to
onen the CD
compartment
.
Note: If using the CD micro system for the
first time, remove the protective sheet
from inside the compartment, before
use.
2. Remove the CD from its case, place
carefully into disc compartment over the
centre spindle and lock in place, with
the label side up.
3. Press the OPEN/CLOSE button to close
the CD door. The display will show the
total number of tracks and the total
playing time. The CD door can be
opened at any time.
First press either STOP/BAND on the
remote control or STOP/BAND on the
unit, then press the OPEN/CLOSE
button.
Please Note:
•
Do not place foreign objects into the CD
compartment, this may damage the
mechanism.
•
Always keep the CD door shut, to
prevent dust or dirt from getting into CD
mechanism.
•
Never place more than one CD into the
CD compartment at any time.
•
After CD door is closed, CD
information may not appear on the LCD
display, this means the CD cannot be
read by the CD mechanism. Refer to
the ‘Care and maintenance’ section.
Playing a CD
On CD micro system, or remote control:
1. Press the play/pause button, . The
display will show the track number and
the elapsed playing time.
2. To pause playback, press the play/
pause button, . The elapsed time
will flash.
3. To resume playback press play/pause,
again.
4. To stop playback, press either STOP/
BAND on the remote control or STOP/
BAND on the unit.
Track Selection
Using the remote control:
1. Press either the TRACK/TUNE buttons
to select the desired track number.
2. Press play/pause, to start playing.
Using the unit controls:
1. Press either of the SKIP buttons to
select the desired track number.
2. Press PLAY/PAUSE, to start playing.
Track Selection During Play
Using the remote control:
1. During play, press either of the TRACK/
TUNE buttons to select the desired track
number. The selected track will
automatically start to play.
Using the unit controls:
1. During play, press either of the SKIP
buttons to select the desired track
number. The selected track will
automatically start to play.
Stop Play
1. Press STOP/BAND on the remote
control or the unit. The display will
show the total number of tracks and
total playing time.
2. Press the OPEN/CLOSE button, to
remove the CD from the compartment.
