![background image](http://html.mh-extra.com/html/curtis/ledvd1339a/ledvd1339a_instruction-manual_2699890005.webp)
IMPORTANT SAFETY INSTRUCTIONS
MAINTENANCE
CLEANING THE DISC
2
1)Read these instructions.
2)Keep these instructions.
3)Heed all warnings.
4)Follow all instructions.
5)Do not use this apparatus near water.
6)Clean only with a dry cloth.
7)Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
8)Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (Including amplifiers) that
produce heat.
9)Do not defect the safety purpose of the
polarized or grounding-type plug.
A
polarized plug has two blades with one
wider than the other.
A groundingtype plug has two blades
and a third grounding prong.
The wide blade or the third prong is
provided for your safety.
If the provided plug does not fit into your
wall outlet, consult an electrician for
replacement of the obsolete outlet.
10)Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
11)Only use attachments / accessories specified
by the manufacturer.
1
2
)Use only with the cart, stand,
tripod, bracket, or table
specified by the manufacturer,
or sold with the apparatus.
When a cart is used, use caution when
moving the cart / apparatus combination to
avoid injury from tip-over.
13
)Unplug this apparatus during lightning
Storms or when unused for long periods of
time.
14
)Refer all servicing to qualified service
personnel. Servicing is required when the
apparatushas been damaged in any way,
such as the power cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
15
)To prevent electric shock, ensure the grounding
pin on the AC cord power plug is securely
connected.
A defective or soiled disc inserted into the unit can cause sound to drop out during
playback.
Handle the disc by holding its inner and outer edges.
·
Do NOT touch the surface of the unlabeled side of the disc.
·
Do NOT stick paper or tape on the surface.
·
Do NOT expose the disc to direct sunlight or excessiveheat.
·
NEVER use solvents such as benzine or alcohol to clean the disc.
·
Clean the disc before playback. Wipe the disc from the center
outward with a cleaning cloth.
·
Do NOT use irregular shaped discs
(example : heart shaped, octagonal, etc.).
They may cause malfunctions.
·
Be sure to turn the unit off and disconnect the AC power cord before maintaining the unit.
·
Wipe the unit with a dry soft cloth. If the surfaces are extremelydirty,
wipe clean with a cloth that has been dipped in a weak soap-and-water solution and
wrung out thoroughly. Wipe with a dry cloth.
·
Never use alcohol, benzine, thinner, cleaning fluid or other chemicals. Do NOT use
compressed
air to remove dust..
Before transporting the unit, remove the disc from the disc compartment.