Curtis LCP4210, Operation Manual

Page: 13 / 18

3 . OSD of the CHANNEL function
MENU INTRODUCTION
Press
or button to reach the required setting .
1.Tuner mode ： CABLE and ANTENNA .
2.Scan the channels and memorize the channels automatically by / OK button .
Press MENU / EXIT button to stop or it will not stop until the scan is finished .
3.Channel skip : press OK button to enter the submenu . press or button to select
the channel you want to set , and press OK button to set .
10
Video
Audio
Channel
Function
Lock
Channel Skip Select Exit CH +/-
VOL +/-
EXIT
OK
Enter
2 Analog
3 Analog
4 Analog
5 Analog
6 Analog
7 Analog
8 Analog
9 Analog
10 Analog
11 Analog
Video
Audio
Channel
Function
Lock
Channel Select Exit CH +/-
VOL +/-
EXIT
Tuner Anten na
Channel Scan
Channel Skip
OK
Enter
2 . OSD of the AUDIO function
MENU INTRODUCTION
Press
or button to reach the required setting .
1.Left/Right track balance adjust . Press or to
adjust the audio output between left and right
speakers .
2.Bass adjust . Press or to increase or decrease
the level of the lower - pitched sounds .
3.Treble adjust . Press or to increase or decrease
the level of the higher - pitched sounds .
4.Sound Surround adjust : Select off / on .
5.Sound mode: Press or to select Concert/Living Room /Hall/Bathroom/Cave
/ Arena / Church / off .
6.Equaliter adjust : Press or to select off / Rock / POP / Live / Dance / Techno
/ Classic / Soft .
7.AVL adjust : Select off / on .
Video
Audio
Channel
Function
Lock
Audio Select Exit CH +/-
VOL +/-
EXIT
Balance 0
Bass 50
Treb le 50
Sound Surrou nd off
Mode off
Equalizer off
AVL off
OK
Enter
Video
Audio
Channel
Function
Lock
Channel Scan Cancel
EXIT
Statu s : Scanning ... Anten na
Analog Channels : 0
Digital Channels : 0
63 %
Video
Audio
Channel
Function
Lock
Channel Select Exit CH +/-
VOL +/-
EXIT
Tuner Anten na
Channel Scan
Channel Skip
OK
Enter