Please watch TV indoors where there is proper brightness. Please make sure
the sunlight will not fall directly on the picture screen. Please relax your eyes
every now and then by taking an overlook.
Before cleaning, please turn off the TV and unplug the power cord.
Clean the screen with a soft cloth moistened in warm water.
A mild soap may be used if the screen is extremely dirty.
Dry the screen with a soft cloth after cleaning.
Clean the TV and control panel with a soft cloth. A mild soap may be used if the
screen is extremely dirty. Dry them with a soft cloth after cleaning. Choose
the right cleanser, or it may fade the TV set, or make it scratched or cracked.
Watching TV
How to Clean the Picture Screen
How to Clean the TV Set
To Avoid Wireless Receiver
This TV set is designed to comply with the EMI standard to avoid problems of wireless receiver.
■
Set the TV far away from wireless receiver.
■
Adjust the wireless’s antenna to avoid interference on TV;
■
Make sure the TV set is out of interference with the wireless;
■
The antenna should use coaxial line.
■
Turn off all the equipments, except the TV set to check if the TV interferes
the wireless receiver;
■
If the problem occurs, please check all the notes above.
6
Don’t Set the TV in the places below:
■
Under sun or near heaters.
■
Places where difference in temperature goes great.
■
Places that have bad ventilation.
■
Near fire.
■
Moist places such as bathroom.
■
Places that human walks frequently or places where are quivering fiercely.
■
Places where is deflective or unbalanced.
SAFETY INSTRUCTION
7
SAFETY INTRODUCTIONS
Discs Maintenance
Notes of Cable Connection
■
Make sure that all cables, including connector plugs, extend lines, and connecting cables between
equipments are specify by the manufacturer. Before changing the connection, please turn off the power
and unplug the power cord.
■
The power cord should not be the same one as other equipments.
■
Use plugs with a protective earthing connection.
Notes of Transportation
Other Notes
Notes on Installation
Please handle with care during transportation. Please use the original carton,
or it may damage the TV set. Please retain the original carton.
■
The sensor of remote control will not work if the lights, such as sunlight or bright indoor
illumination fall directly on it. Make sure that there is no interference from wireless, or it
may cause distortion of the picture or unusual sound. There should no equipment like
mobile telephone or wireless receiver.
Impacts on remote control may lead to trouble.
Handle the remote control with care
■
Please don’t throw the remote control;
■
Don’t set heavy object on remote control.
■
Please dispose the appliance with the observance of the local law.
■
Do be ware of all electrical equipments.
■
Never use wooden screws and bracket to fix. Use those that are specified by the manufacturer.
■
Use only the stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. Use caution when moving the apparatus.
■
Pleas follow all the operating instructions of the wall or ceiling mounting.
■
Use only the attachments/accessories specified by the manufacturer.
■
If you have any questions on installation, operation, or safety, please call the dealer.
1. To remove a disc from its storage case, press on the center of the case and take the disc out.
2. Hold the disc by the edges, to avoid touching the Recorded side of the disc.
1. Fingerprints and dust should be carefully wiped from the disc's surface with a soft Cloth.
Audio discs and DVD discs have no grooves to collect dust and microscopic debris so gently wiping with a
soft cloth should remove most particles. Wipe in a straight line from the inside to the outside of the disc. Small
dust particles and light stains should have no effect on reproduction quality.
2. Never use chemicals such as record sprays, antistatic sprays, Benzine, or thinners to clean the discs.
These chemicals can irreparably damage the disc's surface.
3. Discs should be returned to their cases after use. This avoids serious scratches
that could cause the laser pickup to skip.
4. Do not expose discs to direct sunlight, high humidity, or high temperature for
extended periods. Exposure to high temperatures can warp the disc.
5. Do not stick paper or write anything with a ball point pen on the label side of the disc.