OPERATING INSTRUCTIONS
OI1
(&.4*'(&.5*'01&3"5*/(*/4536$5*0/4øø
"
Brewing Instructions
Place an empty IntelliFresh
®
satellite under the brew
basket. Make sure the
satellite is pushed all the way
back against the front cover
and is making contact with
the electrical socket.
3
*OTFSUBDMFBOQBQFSmMUFSJOUP
the brew basket.
4 Fill with the proper amount
of amount of ground coffee.
-FWFMUIFDPGGFFJOUIFmMUFS
5
4MJEFUIFmMMFECSFXCBTLFU
into the brew rails under the
control panel. Slide it all the
way back until it stops.
The brewer will brew coffee based on the settings programmed into the universal control module (UCM). To
change the settings, see the
PROGRAMMING GUIDE
section. When brewing starts, the warmer will come on.
Press the warmer button to turn the warmer off without turning off the brewer.
The brewer should be ON.
$POmSNUIJTBUUIFSFBSUPHHMF
switch. “Ready to brew”
should be on the display. If
the brewer is connected to an
inter-lock grinder, the grinder
should be on. When inter-lock
connection is made, grind
coffee at this time.
6 Press the brew button. Brewing
will begin immediately and the
warmer inside the satellite will
turn on automatically.
WARNING
- TO AVOID SCALDING, AVOID SPLASHING.
Keep body parts clear of the brewer during
brewing. Do not remove the brew basket while “Brewing” appears on the display.
NOTICE
-
Only use IntelliFresh satellites on IntelliFresh brewers.
The G3 Gemini Intellifresh
®
brewer is factory preset for optimal performance.