Curtis CT Series, Instruction Manual

Page: 4 / 35

CT SERIES
CAP 410
PAGE 2
LIMITED SAFETY PRECAUTIONS
(Also see supplement LV-474)
The following safety precautions are recommended
in the use of this compressor:
1. Furnished with a totally enclosed OSHA-
approved belt guard to cover the drive assembly.
Where possible, place the flywheel toward the
wall, and mount the unit a minimum distance of 2
feet from the wall for maintenance convenience.
2. Turn off & lock out the electrical disconnect
switch before working on the unit to prevent the
unit from starting unexpectedly
3. Release all air pressure from the system before
working on the unit and red tag all electrical
control switches, for safety precaution.
4. Do not by-pass motor over-current protection.
5. Do not change the setting or in any way affect
the operation of the safety valve.
6. Keep unit securely anchored so that movement
will not put a strain on piping, wiring, or air
receiver.
(DO NOT USE plastic pipe, rubber
hose, or lead-tin soldered joints in any part of
the compressed air system.)
WARNING: Read and understand supplement LV-474 before installing and operating the compressor.