![background image](http://html1.mh-extra.com/html/curtis/cd149/cd149_instruction-manual_2699229004.webp)
— ENGLISH -2 —
— ENGLISH -4 —
PREPARATIONS BEFORE USING
Battery Installation
1. Open Battery Compartment cover.
2. Insert 2 batteries (LR6, “AA” size, or equivalent)
in the correct polarity as indicated.(Batteries not included)
(Heavy duty batteries are recommended.)
3. Close the cover properly.
AC Power Adaptor
1. Plug the DC output of the adaptor to the DC Jack.
2. Connect the adaptor (4.5V/500mA) to a power outlet. (Adaptor not included)
Make sure the voltage is compatible.
DISC PLAYING
This CD player is designed to play the 8cm and 12cm compact disc without using
adaptor.
Getting Start
1. Insert the headphone/earphone plug to PHONE JACK.
2. Push the OPEN switch to right side, and then the door open, put a disc into the
CD compartment with label side upward.
3. Push the disc gently around the centre area until it clicks so that the disc fits
into the pivot.
(To remove the disc : Pick up the disc, holding the edge, while pressing the
pivot gently.)
4. Close the door and press the PLAY/PAUSE button once.
5. The Display will show the total number of tracks of the disc, then begin to play
the first track.
General Operation
Play/Pause Buttons
— Press once to start playback in the original
order.
P r e s s a g a i n t o s t o p t h e d i s c p l a y
temporarily.
Stop Button
— Press once to stop playback.
Press again to turn off power.
Skip / Search Buttons
— Press once to skip to next track or
back to previous track .
— Press continuiously to search forward
or backward .
Various Playing Modes
MODE Button — There are 3 kind of function :
A. Repeat Play
During PLAY mode
•
Press the MODE button once to play single track repeatedly.
•
The repeat indicator will appear in the display.
During PLAY mode
•
Press the MODE button twice to play the entire disc repeatedly.
•
The repeat indicator will appear in the display.
NOTE - To cancel REPEAT simply press the MODE button until the repeat indicator
disappears.
B. Intro Scan
In STOP mode
•
Press the MODE button three times.
•
The INTRO indicator will appear in the display.
•
Press the PLAY button to play the first 10 seconds of each track on the disc.
NOTE - To cancel INTRO SCAN simply press the MODE button until the INTRO
indicator disappears.
C. Random Play
In STOP mode
•
Press the MODE button four times.
•
The SHUF indicator will appear in the display.
•
Press the PLAY button, all the tracks on a disc to be played in a random sequence.
NOTE - To cancel RANDOM PLAY simply press the MODE button until the SHUF
indicator disappears.
Program Play
1. Press the PROG button when the unit is in the stop mode until PGM show on the
display.
* The PGM indicator will appears on the display.
2. Press
or
to select the desired track.
3. Press the PROG button to enter the track into memory. The program numbers
which will be increment one step.
4. Repeat step 2 and 3 to program the order of more tracks can be programmed into
memory.
5. Press to start the program play.
6. To erase the program, simply press the STOP button to turn the power off.
— ENGLISH -3 —
ALL
LOCATION OF CONTROLS
1.
PROG (PROGRAM)
2.
SKIP / SEARCH DOWN
3.
SKIP / SEARCH UP
4.
PLAY / PAUSE (POWER ON)
5.
STOP / OFF (POWER OFF)
6.
MODE
7.
VOLUME
8.
B.B.S. BUTTON (BASS BOOST BUTTON)
9.
HEADPHONE JACK
10. OPEN BUTTON
11. DC JACK
12. BATTERY COMPARTMENT
CAUTION
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
THIS SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED
SERVICE PERSONNEL.
1
2
3
4
5
6
7
8
9
10
11
12