manualshive.com logo in svg

Curtis Mathes CMV42002, Owner'S Manual, Page: 7 / 31

Share
Download
Curtis Mathes CMV42002 Owner'S Manual Download Page 7

3

VCR Setup

Use the jacks on the rear panel to connect the VCR to other components and signals, including:  VCRs, TVs,
stereo equipment, digital video components, antenna and cable signals.
Note: CMV42002 has one Audio out on the rear panel.

Rear Panel

75-ohm round
antenna lead

300-ohm flat
antenna lead with adapter

Cable/Antenna
IN TO VCR

VCR
OUT TO TV

Antenna Connection

If your outside antenna cable is a 300 ohm flat feeder, use 
an adapter to connect the antenna to the VCR input terminal.
You can purchase an adapter at an electronics store. 
If your antenna already has a round lead, simply connect it 
to the terminal on the rear panel of the VCR. 
Once your antenna is connected to the VCR,  connect a
cable from the VCR to your TV from the “Out to TV” 
terminal on the rear panel of the VCR.

Cable Connections

Basic Cable TV Connection 

This set-up will enable you to:

- Record an unscrambled channel.
- Watch an unscrambled channel while recording it.
- Record an unscrambled channel while watching 

another (only when you connect a cable-compatible TV).

You will need to:

• To record a channel while watching another, press 

TV/VCR on the remote control to turn off the “VCR” 
indicator in the VCR display and select a desired 
channel on the TV.

Connections

AUDIO OUT (L/R)

Used to output audio signals to

connected equipment.

IN FROM ANT 
Used to input cable or antenna signals.

OUT TO TV  
Used to output VCR signals to a TV.

VIDEO OUT

Used to output video signals from 

VCR to connected equipment.

01925A CMV62002  7/27/02 5:01 PM  Page 3

Summary of Contents for CMV42002
































Reviews:

No comments