Hurricane ES Owner’s Manual
15
6.0
6.0
6.0
Maintenance
1.
Periodically clean the formulation tank using a hot water/detergent solution. Fully
open the machine valve and operate the machine for 3 to 5 minutes, flushing the
solution through the valve, lines and nozzle.
2.
Examine the electrical cord for evidence of damage and replace any damaged
FIGURE 5
Valve Knob
Formulation Tube
Detail “A”
See Detail “A”
Approximate flow rates for the valve position
settings are as follows:
Position
Flow rate*
Droplet Size (VMD)
1
6 oz/min (177 ml/min) 10-20
2
7.5 oz/min (222 ml/min) 20-30
9.5 oz/min (281 ml/min) 30-50
*Flow rates shown are approximate and will vary depending on
liquid viscosity and temperature.
Important: Always spray responsibly. This device is designed to
dispense formulations in a SPRAY (Cold Fog). Many of the
formulations which may be dispensed with this machine require
registration with or approval by various government agencies.
Always calibrate your machine to the proper flow rate in accordance
with the formulation labels recommended rate prior to doing any
spray application.
TABLE 2
Summary of Contents for Aire-Mate Hurricane ES 3001-5
Page 19: ...Hurricane ES Owner s Manual 19 8 0 Electrical Schematic Diagram for 110V and 220V ...
Page 20: ...Hurricane ES Owner s Manual 20 9 0 Hurricane ES Exploded Parts Diagram ...
Page 21: ...Hurricane ES Owner s Manual 21 9 1 Hurricane ES Exploded Parts List ...
