INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com
3. Place (2) bolts through each 12154-SP plate and install
thought the frame as shown in the diagram above.
Temporary removal of the (1) fastener supporting the
canster on the driver side frame rail will aid access but is
not required.
4. Raise hitch into position and slide the bolts through to
support it. Loosely install the supplied hex flange nuts and
the (2) hex bolts and conical washers as shown. Be sure
teeth on washers are against the hitch mounting plate.
5. Torque all 10mm fasteners to 48 lb-ft and all 1/2" fasteners
to 110 lb-ft.
6. Reinstall canister fastener, if removed, and rubber exhaust
hangers.
Summary of Contents for 12154
Page 4: ......