GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT.
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT
WARNING: *** DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY. ***
FOR MORE INFORMATION LOG ONTO WWW.CURTMFG.COM & FOR HELPFUL TOWING TIPS LOG ONTO WWW.HITCHINFO.COM
HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT 1-800-798-0813
INSTALLATION STEPS
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
CURT Manufacturing LLC., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser.
If the product is found to be defective, CURT Manufacturing LLC., may repair or replace the product, at their option, when the product is returned, prepaid,
with proof of purchase. Alteration to, misuse of, or improper installation of this product voids the warranty. CURT Manufacturing LLC.'s liability is limited to
repair or replacement of products found to be defective, and specifically excludes liability for incidental or consequential loss or damage.
This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C.Regulation V-5 and SAE J684.
4,000
400
6,000
600
FORD RANGER
5/9/2016
13287
30
41
20
HITCH WEIGHT: LBS.
INSTALL TIME
PROFESSIONAL: MINUTES
NOVICE (DIY): MINUTES
INSTALL NOTES:
Scan
for more
information
Parts List
DESCRIPTION
PART NUMBER
QTY
ITEM
HEX BOLT
M12-1.75 x 35mm
3
1
CONICAL TOOTHED WASHER
1/2
3
2
CARRIAGE BOLT
1/2-13 x 1 1/2, GR8
3
3
HEX FLANGE NUT
HFN 1213, GR8
3
4
1/2" FISHWIRE
1_2 FISHWIRE
2
5
.250 x 1.00 x 3.00" SQUARE HOLE SPACER
CM-SP6
3
6
1. If equipped, remove factory tow loop from driver side by removing (6) M12 fasteners with a 15mm socket.
2. Fishwire (3) 1/2" x 1 1/2" carriage bolts and (3) CM-SP6 spacers into the passenger side mounting holes as
shown above.
3. Raise hitch into position and install remaining fasteners as shown in the diagram above.
4. Torque all 12mm fasteners to 79 lb-ft and all 1/2" fasteners to 110 lb-ft.
5
2
1
3
6
4
DRIVER SIDE
FRAME RAIL
EXISTING HOLES
PASSENGER SIDE
FRAME RAIL
EXISTING WELDNUTS
- NO DRILLING REQUIRED
- REMOVE TOW LOOP
TOOLS REQUIRED
RATCHET
6" SOCKET EXTENSION
15mm SOCKET
3/4" (19mm) SOCKET
TORQUE WRENCH
SAFETY GLASSES
Summary of Contents for 13287
Page 3: ......
