HA V ING INST A L L A T ION QUE ST IONS? C A L L T E C HNIC A L SUPPOR T A T
1-877-287-8634
INS TA L L A T ION S T E P S
P E R IODIC A L L Y C HE C K T H IS R E C E IV E R H IT C H T O E NS U R E T H A T A L L F A S T E NE R S
A R E T IG H T A N D T HA T A L L S T R U C T UR A L C OMP ONE NT S A R E S OU ND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. C urt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
J E E P P A TR IOT & C OMP AS S
5/8/2020
13081
PA GE 2 of 2
TR IM
NOTE : T rim dimensions are approximate. C heck fit prior to completing trim.
TR IM DIA GR A M
1. T emporarily remove (4) plastic fasteners and (4) hex screws from fascia.
2. Lower exhaust by removing (3) rubber isolators. S ee R UBBE R IS OLAT OR R E MOV AL DIAGR AM above.
(Note: S upport exhaust to avoid possible damage.)
3. T emporarily remove heat shield by removing (4) nuts. (Note: If tow loop is present remove and return to
vehicle owner.)
4. Insert 4" hex bolts with washers into the frame rails from the outside. R aise the hitch into position between
the frame rails. Push front bolts through mounting plates and loosely install 1/2" flange nuts.
5. R otate hitch up so that it is touching fascia and mark where to trim.
6. T rim fascia. S ee TR IM DIAGR AM above. (Note: C heck fit prior to completing trim.)
7. S ecure hitch to the frame with (4) flange nuts.
8. T orque all 1/2" fasteners to 110 lb-ft.
9. R einstall heat shield, fasteners, and exhaust removed in steps 1 & 2.
F AS CIA C E NTE R
VE HIC L E F AS CIA
2 9/16
2 5/8