I NS T AL LATI ON W ALKTHR OUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
2. Lower exhaust by removing (3) rubber isolators. S ee
R UBBE R IS OLATOR R E MOV AL DIAGR AM on page 2.
(Note: S upport exhaust to avoid it possible damage.)
4. Insert 4" hex bolts with washers into the frame rails from
the outside. R aise the hitch into position between the frame
rails. P ush front bolts through mounting plates and loosely
install 1/2" flange nuts.
1. Temporarily remove (4) plastic fasteners and (4) hex
screws from fascia.
3. Temporarily remove heat shield by removing (4) nuts.
(Note: If tow loop is present remove and return to
vehicle owner.)
