INSTALLATION
9
* All images are for reference only;
please refer to your individual unit
for actual item.
1
2
4
3
6
5
1 Upper hinge cap
2 Upper screws
& upper hinge
bracket
3 Plug
4 Lower screws,
levelling front leg
& lower hinge
bracket
5 Levelling front leg
6 Shaft Sleeve
11. With the door closed, check that the
door is aligned horizontally and vertically
and that the seals are closed on all sides
before finally tightening the bottom
hinge. Re-adjust the levelling feet as
needed.
Cleaning Before Use
Wipe the inside of the unit with a weak solution of bicarbonate soda. Then rinse with warm
water using a ‘wrung-out’ sponge or cloth. Wash the drawers in warm soapy water and dry
completely before replacing in the unit. Clean the exterior of the unit with a damp cloth.
If you require more information refer to the Cleaning section.
Before Using Your Unit
Before placing any food in your unit, turn it on and wait for 24 hours, to make sure it is
working properly and to allow it time to fall to the correct temperature. Your unit should not
be overfilled.
• Before Plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the unit.
• Before Turning On!
Do not turn on until two hours after moving the unit. The coolant fluid needs time to settle.
Summary of Contents for CUF50W12
Page 1: ...INSTRUCTION MANUAL 50CM UNDERCOUNTER FREEZER CUF50W12 ...
Page 2: ......
