Currys Essentials CDW60B14, Instruction Manual

Page: 30 / 36

30
Maintenance After a Prolonged Period of Non-Operation
If you are not going to use the unit for a prolonged period of time, you are advised to:
1. Disconnect the dishwasher from the mains.
2. Disconnect the dishwasher from the water inlet and drain. Use a suitable receptacle to catch any
residual water in the pipes.
3. Slightly open the door to prevent unpleasant smells building up in the compartment.
4. Ensure the washing compartment of the dishwasher is clean.
Hints and Tips
Technical Problems
Problem Possible Causes Remedy
Dishwasher does not start.
The door is not properly
closed.
Close the door firmly.
The unit is not connected to
the mains socket. Connect the mains plug to the mains
socket.
The unit is not switched on.
Press the On/Off button and select a
programme.
3 in 1 program light is blinking
rapidly
Water tap is not turned on. Turn on the water tap.
Low water pressure
(<0.04MPa) Turn on the water tap and ensure it is
in full position.
Flow meter is broken.
• Disconnect from the mains.
• Disconnect the water inlet.
• Call a qualified technician.
The wire terminals which
connect the flow meter are
loose.
1 hour light is blinking rapidly
The float switch is broken or
PCB is faulty.
The wire terminal connected
to the float switch is loose or
broken.
The drain pump is not working
properly. The anti-flooding system has
operated.
• Disconnect from the mains.
• Disconnect the water inlet.
• Call a qualified technician.
Repairs should only be carried out by a qualified technician in strict accordance with current local and national
safety regulations. Unauthorised or incorrect repairs could cause personal injury or damage to the unit.
Before calling for service, please refer to the “Technical Problems” and “General Problems” sections to solve
some general problems by yourself.