Currys Essentials CDW60B14, Instruction Manual

Page: 26 / 36

26
Switching Off the Unit
To save energy, remember to switch the dishwasher off using the ON/OFF button. The dishwasher will
continue to use electricity until it is switched off with the ON/OFF button.
If the dishwasher is not going to be used for a long period of time, e.g., you are going on holiday, please
disconnect the dishwasher from the mains supply and switch off the water supply.
Unloading the Dishwasher
Allowing dishes to cool down before unloading is important as dishes tend to break and chip more easily
when they are hot. Therefore, if you open the dishwasher door fully after switching off, it will allow the
dishes to cool down much faster.
Unload the lower basket first, followed by the cutlery basket and then the upper basket. This will prevent water
drops from the upper basket from falling onto the dishes in the lower basket.
The child lock function only locks the control buttons not the On/Off button.
Delay Start
The starting time of a washing programme can be delayed and adjusted. Please follow the steps below.
1. Open the dishwasher door and load your soiled dishes and crockery.
2. Close the dishwasher door and then press the ON/OFF button to turn on the dishwasher.
3. Select your preferred programme.
4. Set the required delay start time using the Delay button.
5. Press the Start/Pause button. The unit will start the programme at the assigned time automatically.
Half Load
In case you do not have enough dishes for a full load, the half load option can be selected. This will save
hot water and electricity usage. Please follow the steps below.
1. Open the dishwasher door and load your soiled dishes and crockery.
2. Close the dishwasher door and then press the ON/OFF button to turn on the dishwasher.
3. Select your preferred programme.
4. Press the 1/2 button.
5. Press the
Start/Pause button. The unit will start the programme.
Child Lock
The Child Lock prevents children stopping programmes accidentally.
1. When the dishwasher is operating, press and hold the Delay button and the Program button at the
same time for 3 seconds to set the child lock.
2. Press both buttons in the same way to unlock the child lock.