GB-5
Pr
epar
ation
Connec
tions
Initial
Setup
U
sing
the
Fea
tur
es
DVR
(Dig
ital
Video
Rec
or
der)
U
sing
the
Fea
tur
es
via
USB
por
t
U
sing
the
DVD
Fea
tur
es
H
in
ts
and
Tips
, Specifica
tion
and
Saf
et
y
W
ar
nings
4. To remove the base stand, untighten the 4 screws that
hold the base stand to the rear of the TV.
Keep all the spare screws should you want to use
the base stand option.
5. This TV is designed to be wall-mounted with a
standard 75 mm x 75 mm mounting kit designed
for flat-panel TVs (sold separately). Mount this TV
according to the instructions included in the mounting
kit. Due to the space restriction, we recommend that
you make all connections before mounting on the
wall. (refer to page 12-17 for details)
If items are missing, or damaged please contact Partmaster (UK only). Tel: 0844 800 3456 for assistance.
Installing / Removing the Base Stand
Remove the base stand before mounting the TV onto the wall.
The LCD display is very fragile, and must be protected at all times when installing and removing the base stand. Be sure
that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with it. DO
NOT exert pressure on the front of the TV at any time because the screen could crack.
1. Disconnect all cables connected to the TV.
2. Lay the TV down on a flat surface with the back side
facing up. Please make sure to place a soft cushioned
material (such as a pillow or thick piece of foam)
beneath the screen.
3. To install the base stand, reattach the base stand with
the 4 screws.
Screws x 4
(P.N. I.03.MP4010001)
75 mm
75 mm
Four mounting holes
(size M4 screw)
Screws x 4
(P.N. I.03.MP4010001)
Please read this instruction manual carefully while setting up your TV.
If you require additional assistance please call our Customer Technical Services Centre.
Tel: 0844 800 6020 (UK only)
C13DVDB10_IB_100901_Zell.indd 5
01/09/2010 4:40 PM
