Currie Technologies
Technical and Customer Service
1-800-377-4532
11
Y
Z
Aa
24.
Install the front fender
using the three bolts shown in Photo
Y
, then
close the front brake
(see step
5
& Photo
E
on page
4
). Make sure the
fender does not interfere with brake operation (Photo
Z
).
25.
Find the pedals in your parts box. Grease the threads
and
thread them securely into the crank arms using a 15mm open-end
wrench
(Photo
Aa
). Note that the pedals have opposite thread directions
and must go on a specific side of the bicycle. The pedal meant for the drive-
side (the side of the bicycle with the main chain and gears) has a standard
thread, which is tightened clockwise. The non-drive-side pedal has a reverse,
non-standard thread. It must be turned counter-clockwise to be screwed in.
Pedals
Summary of Contents for eZip TRICRUISER
Page 1: ......