Currier Tech eFlow E3Nitro, Owner'S Manual

Page: 26 / 52

A note about operating modes:
Your eFlow electric bicycle features two operating modes:
1 . Power-On-Demand Mode (POD)
2 . Pedal Assist Mode (PAS)
In Power-On-Demand Mode (POD), motor power is regulated
by actuation of the twist-grip throttle mounted on the right-hand
side of the handlebar . Twist the throttle toward you to apply
motor power . Pedaling is optional . Power is available whether
you pedal or not . The position of the throttle will determine how
much power is applied . To terminate power, release the throttle
allowing it to return to its “OFF” position .
In Pedal Assist Mode (PAS), motor power output is dependent
on the rider’s pedaling power . In other words, the bike’s
electrical system ‘senses’ rider pedaling effort, and applies
motor power in proportion to rider effort: the harder you pedal,
the more motor power is applied. The proportion of the ‘Assist’
is set via the display (see the following pages) . If the rider
does not pedal, no power is output from the motor . Ceasing
pedaling during the ride will cause the motor to turn off . Motor
power will be restarted when the rider begins pedaling again .
While in Pedal Assist Mode (PAS), you can override the PAS
function with the throttle. After beginning to ride, rotate the
throttle toward you to achieve any percentage of motor power
up to 100% .
Currie Tech Technical and Customer Service: +1 800-377-4532
p .
26 /52