Cable Connections
8. Connect LED lighting 12V DC power supplies
into LED Light #1 and #2 power ports.
10. Plug all power supplies into a GFCI outlet
and ensure a drip loop is in place.
9. Connect Wave Pump 24V DC power supplies
into Wave Pump #1, #2 and/or #3 power ports.
12V DC Power
LED Light #1
Temperature
USB Port
Expansion
USB Port
6. Place temperature sensor into aquarium or
filter sump and attach using suction cup.
7. Connect temperature sensor to Temperature
USB port on controller.
LED Light #2
24V DC Power
Wave Pump #1
Wave Pump #2
Wave Pump #3
(or Accessory Pump)
microUSB Ports
DC Flow Pumps
(or LOOP Hubs)
Connecting DC Flow Pumps
Control Key Ring
Port #1
Port #1
Port #4
DC Flow
Pump #1
DC Flow
Pump #2
NOTE: Ensure your DC Pump HUB is
Bluetooth compatible. The HUB label will
have a Bluetooth® icon as shown here:
If your HUB does not have this icon,
please contact us for a compatible
HUB at 760-727-7011 or email us
at [email protected].
Connect DC pump HUB(s) to controller
using microUSB cables as shown.
For detailed instructions, visit current-usa.com
Controller Key Ring will illuminate Blue, indicating
power is now ON.
Icon
