1
2
3
3
Step 1. Thread pump filter screen to inlet of the pump.
Installing Pump
eFlux DC Flow Pump
Installation
Step 2. Place 0-ring inside the outlet barb fitting and quick
coupling. Thread barb fitting to pump and hand tighten.
Submersible (internal) Installation
Step 3. Connect return hose (not included) by sliding over barb
fitting. Ensure hose is secured using a hose clamp (not
included).
Step 2. Place o-ring inside the outlet barb fitting and quick coupling.
Thread barb fitting to pump outlet and hand tighten.
Inline (external) Installation
Step 3. Connect inlet hose (not included) by sliding over inlet barb
fitting. Ensure hose is secured by using a hose clamp (not
secure with clamp.
Step 1. Place o-ring inside the inlet barb fitting and quick
coupling. Thread barb fitting to pump inlet and hand tighten.
Step 4. Fill sump with water and check for water/air leaks.
1
2
3
included.) Connect return hose to outlet barb fitting and
Installing Flow Pump Manifold HUB
Step 1. Choose a location underneath your aquarium cabinet free of excessive moisture and/or
saltwater. If connecting to another manifold HUB, ensure distance between HUBs is 2”-4”.
Step 2. Using included wood mounting screws, mount the eFlux flow pump HUB mounting bracket
to stand. Slide flow pump manifold HUB into bracket.
Remove
Cap
Store Cap
Store Cap
Wood
Screws
Flow Pump Manifold
HUB Mounting Bracket
Note: Remove and store the
silicone caps on the manifold
HUB mounting bracket. Keep
caps in place when not using
other ports for protection.
Flow Pump
Manifold HUB
Page 3
Step 4. Fill sump with water and check for water/air leaks.
NOTE: Please ensure to follow your aquarium tank and sump/filter manufacturer instructions
regarding the minimum size requirement of your sump and if a check valve is required.
