7
SET-UP
The following will help with setting up the Cable Feeder and cable reels:
• Make sure there is enough room for the cable to remain slack after
the cable exits the Cable Feeder.
• The maximum angle that the cable should approach the Cable
Feeder is 25° from the center line.
• Make sure the cable insulation will not be damaged.
• The cable may pay off from either the top or bottom of the reel.
• Place the ground cable in the farthest slot to the left of the cable
separator as it enters the cable feeder.
25° MAXIMUM
FROM CENTERLINE
AS CABLE
APPROACHES FEEDER
PROVIDE SUFFICIENT
DISTANCE HERE FOR
CABLE TO REMAIN SLACK
T-ADAPTER
T-BAR RECEIVER