9
LOADING CABLE INTO THE CABLE FEEDER
1. Standing at the exit end of the Cable Feeder, push down and turn the
tension adjustment handle to release the tension adjustment arms
from the ratchet studs. Lift up on the handle and place the tension
adjustment arms with the resting slots (see Figure 1 below) on top of
the ratchet studs.
TENSION
ADJUSTMENT ARM
RATCHET
STUD
TENSION
ADJUSTMENT HANDLE
TENSION
ADJUSTMENT ARM
Lifting tension adjustment
arms to place resting slots on
top of ratchet studs.
Resting slots shown on
top of ratchet studs.
Tension Adjustment
Arm Resting Slot
Figure 1