Current Thinking ALP48 Programming Manual Download Page 20 | Manualshive

Page: 20 / 25

background image

ALP48 Programming Manual

Page 20 of 20

©2009 Current Thinking Ltd

Message store 2: this text is displayed whenever a DCA4 reports a fault on
message store 2.
Event entry on change:

Store 2 text chngd

Zone 1 amplifier: this text is displayed whenever a DCA4 reports a fault on the
amplifier attached to output 1.
Event entry on change:

Zone1 amp text chgd

Zone 2 amplifier: this text is displayed whenever a DCA4 reports a fault on the
amplifier attached to output 2.
Event entry on change:

Zone2 amp text chgd

Zone 3 amplifier: this text is displayed whenever a DCA4 reports a fault on the
amplifier attached to output 3.
Event entry on change:

Zone3 amp text chgd

Zone 4 amplifier: this text is displayed whenever a DCA4 reports a fault on the
amplifier attached to output 4.
Event entry on change:

Zone4 amp text chgd

Zone 1 cable: this text is displayed whenever a DCA4 reports a fault on the
amplifier cable attached to output 1.
Event entry on change:

Zone1 cable text chd

Zone 2 cable: this text is displayed whenever a DCA4 reports a fault on the
amplifier cable attached to output 2.
Event entry on change:

Zone2 cable text chd

Zone 3 cable: this text is displayed whenever a DCA4 reports a fault on the
amplifier cable attached to output 3.
Event entry on change:

Zone3 cable text chd

Zone 4 cable: this text is displayed whenever a DCA4 reports a fault on the
amplifier cable attached to output 4.
Event entry on change:

Zone4 cable text chd

Next service date: this text is displayed whenever a DCA4 reports that its next
service date has passed.
Event entry on change:

Service text chgd

Monitor DCA4 fault

This menu enables the ALP48 to monitor all DCA4s for specific faults. This
enables the ALP48 to only show the specified faults in the fault log. To enable
monitoring for that fault, toggle the value to

Y

.

As there are 10 DCA4 faults that can be monitored, the display is split into 3
pages. To move to the next page, press [A] when the cursor is on

Next

.

The ALP48 receives regular status reports from the DCA4, including all faults
current on that DCA4. If the DCA4 reports a fault, and the appropriate
monitoring is enabled, then that fault is added to the event log.

«
...
18
19
20
21
22
...
»

Summary of Contents for ALP48


























Reviews:

No comments

Related manuals for ALP48

Brand: Schoeps Pages: 8

Brand: LD Pages: 88

Brand: Samson Pages: 21

Dynadish Series

Brand: MikroTik Pages: 5

Brand: Fame Audio Pages: 8

ULTRALINK ULB2000

Brand: Behringer Pages: 16

Brand: Hydro-Gear Pages: 40

Brand: GIGAMEDIA Pages: 13

Brand: Nady Systems Pages: 16

Brand: Ahuja Pages: 4

Brand: Endgame Gear Pages: 218

Peltor PELTIP21-01

Brand: 3M Pages: 72

Brand: Radio Corporation Of America Pages: 16

Brand: Ibiza sound Pages: 23

Brand: Earthworks Audio Pages: 3

Brand: Samson Pages: 13

Brand: Harman Pages: 17

Brand: Chiayo Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands