background image

4

July 2017

1. 

Introduction

Congratulations on your purchase of a Hydra-Pack by 

Curb Roller. 

The Hydra-Pack has been designed and manufactured to 

provide years of service. 

Carefully examine your equipment upon receipt. Report 

any damage immediately to the freight carrier and register 

any claim. If any material or manufacturing defects be 

discovered, contact Curb Roller Manufacturing. 

Read and understand this manual before setting up, 

operating and maintaining this equipment. Follow all 

safety instructions. 

Information provided in this manual was current as of the 

issue date. Curb Roller Manufacturing reserves the right 

to make design changes without further notice or liability. 

Information furnished in this manual does not include 

all of the details of design, production, or variations 

of the equipment. It does not cover all the possible 

contingencies, which may arise during operation. If 

special problems arise or further information be desired, 

please contact Curb Roller Manufacturing. 

Equipment  modifications  from  original  design  and 

specifications  are  strictly  prohibited.  Modifications  may 

compromise safe operation subjecting users to serious 

injury or death, and may void any remaining warranty.

Curb Roller Manufacturing reserves the right to change, 

improve, modify or expand features of this equipment 

at  any  time.  Specifications,  models,  or  equipment  are 

subject to change without notice, and without incurring 

any obligations to change, improve or expand features 

of previously delivered equipment. Because of the 

variations in optional equipment and continued design 

improvement, certain information contained within this 

manual may not apply.

This operators manual does not replace, nor does its 

use release the owner/operator from observing all safety 

codes or operating limitations as well as any applicable 

federal, state, provincial or local regulations.

Introduction & Warranty

2. Warranty

Curb Roller Manufacturing warrants to the original 

purchaser that this product will be free from defects in 

material and workmanship. 

Curb Roller Manufacturing agrees to repair or replace, at 

manufacturer’s discretion, any defective product free of 

charge within three years from the date of purchase.

If any of the warranted goods are found by Curb Roller 

Manufacturing to be defective in material or workmanship, 

such goods will at Curb Roller’s option be replaced or 

repaired. All warranty claims will be addressed upon 

inspection of goods returned, prepaid, and/or review of 

the claim (photos with notification of alleged defects) by a 

direct Curb Roller Manufacturing representative.

Curb Roller Manufacturing must authorize all work and 

returns prior to any work being performed or returns 

made. If the customer does perform work and makes a 

return without authorization, the customer does so with 

the understanding that Curb Roller Manufacturing or any 

of its agents shall not be obligated for the cost of any 

such unauthorized expenses or actions. 

The purchaser of any goods covered by this warranty 

understands and agrees that the sole and exclusive 

remedy against Curb Roller Manufacturing shall be for 

the replacement or repair of defective goods as provided 

herein.

All allowances will be credited at factory cost, with no 

provisions for overtime, travel time, mileage, freight 

charges or special services, i.e. down time.

Proof of purchase in the form of your dated sales receipt 

showing serial number and the model of the product will 

be required before our dealers can perform warranty 

service on the product.

Curb Roller Manufacturing Products Warranty Period

1. 

Warranted for a period of three (3) years after date of 

original purchase to original purchaser.

2.  Replacement parts provided under the terms of 

warranty applicable to and/or the product on which 

installed as if such parts were original components 

of that product.

Curb Roller Manufacturing Products Warranty Shall 

Not Extend Or Apply To:

1.  Defects which in our judgment are the result of 

misuse, negligence, accident, or failure to perform 

regular maintenance or service, and any parts that 

may wear and need to be replaced.

Summary of Contents for Hydra-Pack

















Reviews: