ENGLISH
11
ENGLI SH
DESCRIPTION
1.
Toilet seat
2.
Bracket with automatic soft-closing
3.
Bolt, 2 x
4.
Metal plate, 2 x
5.
Plastic washer, 2 x
6.
Centring washer, 2 x
7.
Plastic washer, 2 x
8.
Metal washer, 2 x
9.
Nut, 2 x
10.
Key
ATTACHMENT
1.
Place the brackets with automatic closing in the left and right holes in the toilet seat. The spacing of
the holders can be adjusted to suit the size of the toilet:
2.
Place the bolt in the metal plate.
3.
Slide the metal plate and bolt into the slots in the brackets.
4.
Now place the square plastic washers on the brackets from underneath.
5.
Place the brackets in the mounting holes in the toilet.
6.
Insert the brackets in the holes in the toilet seat.
7.
Now place the centring washer, plastic washer and metal washer on the bolts as shown under
DESCRIPTION.
8.
Screw the toilet seat firmly in place with the nuts. Use the supplied key.
NOTE
The bracket marked L (left) must only be placed in the hole on the side of the seat marked L.
If the brackets are fitted on the wrong side this will damage the automatic closing mechanism.
Do not turn the hinge before the attachment has been completed.
Make sure the brackets are placed in the toilet seat without space between them and the seat.
Perfect functionality cannot be guaranteed if there is a space.
