Seats and head restraints
Headrest
109
WARNING
If travelling with the head restraints removed
or improperly adjusted, the risk of severe or
fatal injuries in the event of accidents and
sudden braking or manoeuvres increases.
•
Always travel with the head restraint cor-
rectly installed and adjusted.
•
To decrease the risk of cervical injuries in
the event of an accident, adjust the head
restraint correctly based on your height, al-
ways making sure that its upper edge is at
the same height as the top of the head, but
never below eye level. Keep the back of your
head always as close to the head restraint as
possible and centred.
•
Never adjust the head restraint while the
vehicle is in motion.
•
Under no circumstances should the rear
passengers travel while the head restraints
are in the non-use position.
NOTICE
When assembling and disassembling the
head restraints, do not let them meet the
top lining of the vehicle, the back rest of the
front seat or other parts of the vehicles. If
not, this could damage the vehicle.
Adjusting the headrests
Fig. 101
Rear headrest: adjusting the
headrest.
Adjusting the height of the head restraints
•
Grab the sides of the head restraints with
both hands and push upwards to the desired
position. To lower it, repeat the same action,
pressing the button on the side
1
•
The headrest must lock correctly in one po-
sition.
Removing and fitting the rear
headrests
Fig. 102
Rear head restraint: removal.
Removing the rear head restraints
To remove the head restraint, the correspond-
ing backrest must be partially folded forward.
•
Unlock the backrest
.
•
Move the head restraint upwards until it ar-
rives to the top.
•
Press button
1
, while simulta-
neously pressing on the safety hole
2
with a
flat screwdriver a maximum of 5 mm wide, and
remove the headrest.
•
Move the backrest until it engages properly
Folding down and raising the rear
.
