Cuppone Tiepolo PAOLO TP635L, Pre-Installation And Installation Manual

Page: 26 / 36

26
min 300mm
[
11,81
in.]
Ø150mm [
Ø5,91
in.]
A B C
Fig. 10
0
200
100
300
°C 400
600
500
0
200
100
300
°C 40
0
600
500
MADE IN ITALY
Mod. TP435/2CM
−C5−CP
VOLT
AC
KW
2019
S/N TP4352CMC5CP 19093959
VOLT
AC
380 - 400V, 50Hz, IPX3
KW
10,6
Fig. 11
Installation
Model
Voltage
Absorption
Year of production
Serial number
Serial number plate reading
Fig. 10
The serial number is on the right hand side of the appliance.
It provides important technical information that is vital in case
of a request for maintenance or repair of the appliance: please
do not remove, damage or modify it.
Smoke extraction
The oven is fitted with a flue in the top to get rid of the steam
from the cooking chamber.
This steam, together with the one from the door during the
work phases,
must be conveyed outside
in one of the
following ways:
Fig. 11
A
through a
hood supplied by the Manufacturer
that
ensures perfect compatibility with the oven. For correct
assembly and fixing to the oven, see the sheet attached
to it; the evacuation flue must be for the exclusive use of
the appliance, comply with current regulations and have a
diameter that allows the passage of a
ø150 mm
[Ø 5.91
in.]
evacuation pipe which corresponds to the diameter of
the tube to be fitted on the hood (not supplied).
B
through a
hood
belonging to the user, of suitable
capacity, placed at about
300 mm
[Ø 11.81 in.]
from the
oven;
C
through an adequate
extraction system
supplied by the
user connected to the oven flue: in this case a draught
switch must be installed between the extractor and the
oven chimney (the extractor, switch and tube are not
supplied by the Manufacturer). In this type of installation,
the fumes resulting from the opening of the door will not
be extracted.
extraction
system
draught
switch