Cuppone Michelangelo ML435, Installation Manual

Page: 5 / 14

Ed. 0219 - 70702521 REV00 Caravaggio - Installation
5
ECO
ECO
ECO
ECO
H
2
O
min.
500 mm
(
in. 19,7
)
Max 35°C
Max 70%
Min 5°C
Max 104°F
Min 41°C
ECO
ECO
Fig.1. Fig.2.
Fig.3.
Transport
Fig.1.
Fitted with personal protection equipment, transport the
appliance to the installation location.
Use suitable equipment, capable of dealing with its weight:
persons not involved with the appliance installation may not pass
through or stand in the work area during the appliance assembly.
During the transport, pay particular attention to passing
through openings and/or doors.
Preliminary operations
Fig.2.
Carefully remove the protective film.
If any glue residue is left on the surfaces, remove it with soapy
water but without any corrosive or abrasive products or sharp
or pointed instruments.
Check that all the parts making up the oven are in good
condition and without any faults or breakages, if that is
not the case, contact the Manufacturer for the
procedures to follow.
Positioning
Fig.3.
Install the appliance in a room:
• dedicated and suitable to the cooking of food;
• having adequate air ventilation;
• that complies with the current regulations on health and
safety and systems in your country;
• protected from the weather;
• with temperatures b5° to +35°C maximum;
• having a maximum humidity of 70%.
When choosing the positioning room, take into account
that the appliance must be
easy to move
for any
extraordinary maintenance: be careful since any
brickwork after installation (e.g.: wall construction, door
replacement with narrower ones, renovations, etc.) do not
hamper movements.
Installation