20
Fig.6.
2
ECO
ECO
T
3
1
D
Fig.7.
1
2
39 kg [85,9 lb]
KLN2TNT
/ 44 kg [97 lb]
KLN2TAS
47 kg [160 lb]
KLN3TNT
/ 52 kg [160 lb]
KLN3TAS
54 kg [119 lb]
KLN650NT
/ 59 kg [130 lb]
KLN650AS
min. 600 mm.
24 in.
Ø150mm [Ø5.91 in.]
Installation
Positioning and connection to the
oven below
The hoods can be positioned
only
over a Leonardo
oven.
The electrical connection must be carried out
exclu-
sively
by qualified personnel after reading the safety
warnings at the beginning of the manual.
Fig.6.
Before connecting the hood
verify that the systems
the oven is connected to comply with the current
regulations
in the country of use.
Disconnect the oven power supply to which the hood will be
connected. Open the side compartment of the latter to gain
access to the electrical panel.
Remove the cap
T
on the top of the Leonardo oven and keep
the locknut
D
.
Fig.7.
Fix the hood to the oven below as shown in the figure.
Make sure that between the hood and the ceiling there is a di-
stance of about
600 mm [24 in.]
(shorter distances could da-
