CSG 600 SLIDING GATE OPERATOR USER
’S MANUAL
1. Important Safety Information
Carefully read and follow all safety precaution and warnings before attempting to install and
use this operator, incorrect installation can lead to severe injury.
⚫
The gate operator should be installed by a qualified technician; otherwise, serious
personal injury or property damage may occur.
⚫
When opening or closing the gate, do not attempt to walk or drive through the gate.
⚫
Children should not be allowed to play near or operate automatic gates.
⚫
The automatic gate operator must be grounded.
⚫
Install the gate operator on the inside of the property, DO NOT install it on the outside of
the property where the public has access to it.
⚫
Be careful when in close proximity to moving parts where hands or fingers could be
pinched.
⚫
Do not allow control devices to be placed so that a person can access them by reaching
through the gate.
⚫
In the event of power failure, an emergency release key allows you to operate the gate
manually.
⚫
Do not attempt to tune the gate by placing your hand, arm or other body part in the path
of the gate, as serious injury could result. Damage to the gate operator motors may also
occur by placing a heavy immovable object in the path during the testing phase. Instead,
place a light object in the path (e.g., a chair or trash can) which can be pushed out of
the way without causing damage to gate motors.
⚫
The operator should be switched off before repairing it or opening its cover.
⚫
Our company reserves the right to change the design and specification without prior
notification.
2. Main Technical Parameters
Tab.1
Model
CSG 600
Power supply
AC 220V, 50Hz
Motor speed
1400 rpm
Gate moving speed
12m/min (19 teeth)
Control unit
All-in-one gate operator, control board included
Max. gate weight
600 Kg
Output torque
14N·m
Limit switch
Spring limit switch
Noise
≤60 dB
Ambient temperature
-
10ºC~+50ºC
