background image

 

M510-2

, page 5 

Dehumidifier model NADER YARD PRO 

 

Protect your nose and mouth with the appropriate mask to avoid inhaling the dust when 
cleaning with compressed air. 

As far as possible, try not to touch the coil battery fins to avoid damaging them. 
Once cleaning is done, refit the mantle by following the instructions by working in the reverse order (from 
the last to the first), taking special care to re-connect the ground wire to the faston connector on the mantle:  
first set down the upper part while at the same time slipping the sides into the appropriate lodgings that 
keeps it with the panels. 

Storage 

 

Keep the appliance in a room with a temperature between –25°C and +55°C. 

 

When the appliance is still packed keep to the instructions on the box. 

 

Do not place other heavy material on the box. 

Check-up to carry out before and after a long period of 
inactivity 

Before 

 

Switch off the machine and disconnect the plug and empty the condensate collection tank; 

 

cover the machine to protect it from dust. 

After 

 

The fan must turn freely without gripping; 

 

put the machine working following this manual’s instructions. 

Disposal of the product 

The machine is made of different metals; all can be recycled. Its refrigeration circuit is charged with the 
ecological refrigerant 

R407c

 under 

HIGH PRESSURE;

 it also contains synthetic oil. Both the gas and the 

oil must not be dispersed in the environment. For the disposal is thus necessary to call a specialized 
company. 

Summary of Contents for Nader Yard Pro Series











Reviews: