13
M898-3_GB_letter
NEB 6500 and NEB 6500 R
bushing B of the solenoid valve.
If cleaning becomes too frequent, it is advisable to install a
cartridge filter on the machine water supply line (see: par.
“4.4 Hydraulic connections”).
7.4 Performing the washing/reset cycle
»
Check that the cycle is done periodically.
To check, carry out the following procedure:
»
Detach the end of the drainpipe not attached to the ma-
chine and insert it into a container to collect the water
drained off.
»
Stop the humidifier by turning off the control humidi-
stat: this starts the washing cycle.
If the cycle does not go on regularly, the water basin and the
siphon must be cleaned.
ATTENTION: The NEB 6500 is an air humidifier, so any
other use to which it might be put, and which is not what
it was designed for (for example spraying insecticides,
disinfectants, essences or any product other than water)
may be dangerous or compromise the good operation of
the machine.
8 Storing
»
Keep the machine in an environment with a tempera-
ture range between 14 °F and 140 °F.
»
When the machine is still packed, keep it upright.
»
Do not put any other heavy things on the box.
8.1 Points to check before and after a long
period of inactivity
8.1.1 Before
»
Disconnect the electric connections and close the supply
water ON/OFF taps;
»
Cover the machine to protect it from the dust.
8.1.2 After
»
Check the state of the air filter and clean it if necessary.
»
Check that the float switch is operational by moving it,
and check that the fan/disk unit turns freely.
»
Make sure that all the connections have been done cor-
rectly, according to instructions.
»
See that the washing/reset cycle is tested, as described
at par. 7.4 “Performing the washing/reset cycle” of the
following manual.
9 Disposal of the product
The machine is mainly composed of parts in plastic, and
some parts in metal; both materials can be recycled. Before
disposing of the product it is advisable to separate the plas-
tic parts (cap, fan, foils, etc.) from the metal parts (motor,
installation brackets). Remove the electronic card from the
electric connection box and see to its disposal according to
the regulations in force.
