To prepare the squeezer for use, follow
these step-by-step instructions:
a) Plug the juice collector to the mains outlet.
b) Place the juice collector glass [9] on the
glass holder [10]. (Note that this part has a
notch for placing the glass correctly).
c) Switch on the squeezer using the On/Off
switch [8]. The squeezer is now ready to
use, although the motor is not yet spinning.
d) Raise the pressure handle [2].
e) Place half an orange or lemon on top
of the dome/strainer [4] and press down
slightly.
f) Lower pressure handle [2] onto the oran-
ge or lemon half. When the fruit is pressed
down, the motor starts automatically and
the juice slowly falls into the juice collector
glass [9].
g) Raise the pressure handle [2]. The motor
stops automatically.
11
Maintenace Operations
12
Preparing the Squeezer for Use
13
Usage Precautions
IMPORTANT: Press the fruit down
SLOWLY all the way. This makes for
correct centrifugation of the pulp (which
is collected inside the dome/strainer [4])
and yields the maximum amount of juice.
Never PRESS DOWN on the handle
ABRUPTLY; this will only break the fruit and
produce a lot of pulp.
Never LIFT the handle ABRUPTLY. Wait a
moment until the pulp filter stops spinning.
Otherwise, the fruit will splash out and spa-
tter you.
b)
c)
d)
e)
