26 |
JetSort
®
2000
series | Setup
Date
The
Date
menu may be
On
or
Off
. If the date option is on, the user is prompted to enter a date
at the beginning of a new batch, after clearing DAY totals. Dates are entered on the numeric
keypad, followed by
Enter
. Dashes may be used between characters (MM-DD-YY). Select
SAVE/-
for the dash. When
Date
is enabled in Setup, this is a required field.
1.
Press
MODE/COIN
to move the cursor to the bottom menu line.
2.
Press
<
or
>
to scroll forward to the desired selection:
Date
.
3.
Press
CONT
to select
On
or
Off
.
D:
DATE
Off
On
ID Codes
The user
ID
feature is used to segment information into units. IDs can be used to identify units,
including users, products, routes or market segments. The user is prompted to enter the ID at
the beginning of a new batch or sub-batch. When
ID
is enabled in Setup, this is a required
field.
Batches and sub-batches can be cleared while the totals remain in memory for each ID. Up to
50 IDs can be assigned a numeric identifier, beginning with the number one (“01”).
1.
Press
MODE/COIN
to move the cursor to the bottom menu line.
2.
Press
CONT
to select
Yes
or
No
.
ID Codes:
Yes
