14 |
JetScan
®
MPX 8200 strapping and corner module
| Configuring strap length and printing
8. The value under Characters Remaining on the bottom right side of the screen
indicates character-limit status.
If the number is positive and highlighted in green, additional characters can be
used.
If the number is negative and highlighted in red, the 40-character limit is exceeded.
If the combined settings are not reduced to 40 characters or less, the Text (custom
message) is cut off after the 40th character.
To bring the combined number of characters below the 40-character limit, do one or
both of the following:
• Reduce the length of the Text (custom message). Press
Customize
and use the
backspace key
to change the message.
• Disable the Date, Time or Operator ID.
9. When configuration is complete:
a. Press
Save
, followed by
OK
to prompt the
Processing Type Setup
tab /
Settings
screen.
b. Press the
Exit Setup
tab to prompt the
Menu
tab screen.
c. Press the
Processing
tab to prompt the main-processing screen.
