© 2012 Cummins-Allison Corp.
17
Direct Access Strapping
The optional
Direct Access Strapping keys
give the operator direct access to preset strap
limits. Without this option, straps may be set by pressing
STRAP
and scrolling to a preset
value or holding down
STRAP
for other values. Pressing a
Strap key
of
50
would produce
this screen:
Strap
Density
Denomination
50 * * COUNT
0
* *
Count
Speed
Batch Accumulation, ADD Key OFF
When processing documents with the
ADD
function
OFF
, the machine will clear the current
count total and generate a print report (if a printer is connected) each time the stacker is emptied.
Operating in COUNT mode with the
ADD key
OFF
produces this screen when 45 coupons are
processed:
Strap
Density
Denomination
100 * * COUNT
45
* *
Count
Speed
The number below the Strap label is the current Strap Limit. If the notes are left in the stacker,
then the next run will be added to the Count. If the notes are removed from the stacker, then the
next run will restart from zero
Assume that the notes were left in the stacker, and another 55 had been run. The machine will
“time out” showing a Strap Limit has been reached.
Strap
Density
Denomination
STRAP LIMIT
100 PIECES
Count
Speed
Once notes are removed from the stacker, the machine automatically resumes counting until it
either counts all the notes in the hopper or reaches another Strap Limit.
