4. Belt Drive Galvanized Fan Assembly Instructions
34
PNEG-942
Belt Drive Galvanized Fans
Step 10 for All 36" and 50" Box (both sides) and Slantwall (discharge side)
Belt Drive Fans (Continued)
Place corner supports on corners as shown. Do not secure to housing yet.
Figure 4AD
Place screen on assembled housing, make sure all four (4) corners of the screen match up to the
four (4) corners of the housing.
Figure 4AE
NOTE:
Trim the mesh on the side the motor protrudes through for box fans.
Secure wire mesh guard and corner supports on both sides of fan with #10-32 x 3/4" hex washer head
type “F” screws and 1-1/2" outer diameter washers as shown.
Figure 4AF
