Part No. 4801-5315 Rev 1-15
Evolution Variable Output
Page 4 of 12
2. Warnings
WARNING
Wiring And Connections Must Comply With All National And Local
Electrical Codes. Installation By Qualified Electrician Required!
WARNING
Disconnect All Electrical Power Sources To Evolution 3000/3001 Controller Or
Farm Hand Stage Master Controller Before Installing EV-VAR!
3. Introduction
The Evolution Variable Output is one of Hired-Hand's latest addition to the electronic controller product line.
Evolution Variable Output (EV-VAR) is used to vary the speed of fans or to vary light luminosity. The Off or On
switch setting overrides the main control system. To allow variable control of the EV-VAR output, connect EV-
VAR to a Hired Hand Evolution 3000/3001 controller or to a Farm Hand Stage Master Controller with the EV-VAR
switch set on VARIABLE. See wiring diagrams for proper connections.
The Evolution Variable Output is available in two versions: The 4KW/4HP model and the 8KW/8HP model.
The Evolution Variable Output models can be used in conjunction with Evolution 3000/3001 Control Systems or
Farm Hand Control Systems (Stage Master, etc.) for variable operation of lights or fans.
For information regarding the Variable Output models with the Override Pot, refer to manual number 4801-5318.
4. Specifications
4.1 Part Numbers and Electrical Ratings
Part No.
Model
No. Outputs
6607-8031
EV-VAR 4KW / 4HP
2
6607-8032
EV-VAR 8KW / 8HP
4
DEVICE RATINGS
Outputs for Each Circuit
Max Current (A)
Lights
2 KW @ 120 VAC
Fused @ 20 A
Fans
2 h.p. @ 240 VAC
Fused @ 20 A
!
!
