Figure 1-4
Wiring Diagram With a DPST Disconnect Switch
DPST
disconnecting switch
EARTH
EARTH
Breaker circuit
L2/N
L1
L2/N
L1
To the
controller
Technical Specifications
EDGE Power Module - Safety ratings
Resistive loads (heat lamps, heat
mats, incandescent light)
Requires a minimum load of 0.2A
16.66A A MAX
120 VAC, 2000 W, 16.66 A, 50/60 Hz
208 VAC, 2000 W, 9.61 A, 50/60 Hz
240 VAC, 2000 W, 8.33 A, 50/60 Hz
Motor/inductive loads
10.5 A MAX
Full Load amperage on the motor nameplate is not the maximum amp.
When varying, the amperage might be higher.
(Nb of Units = Max current rating divided by the max current of the fan)
Requires a minimum load of 0.2A
LED and CCFL loads
120/208/240Vac, 50/60 Hz, 750W, 920VA
Minimum load of 0.2A / 25W
Ballast loads
120Vac, 50/60 Hz, 1200W, 10A max
208 Vac, 50/60 Hz, 1040W, 5A max
240Vac, 50/60 Hz, 720W, 3A max
Requires a minimum load of 0.2A
Operating Temperature
0 to 40°C (32 to 104°F)
891–00548
EDGE Power Module Wiring Diagrams
5
