Part No. 4801-1201 Rev. 1-20
Alert Alarm III
5
6.4 Recommendations
(1) It is recommended that any sensor wire that goes from building to building be run underground.
(2) In any situation where the alarm is used to monitor areas that utilize separate power systems,
relays should be used to inform the controller of a power outage. This could be accomplished via an
auxiliary system and relays or by serializing relays to the power cord of the controller itself.
(3) Use a relay with a 12VDC coil and a separate battery/charging system for any installation where
the siren must be fifty feet or more from the controller.
