Culver Mobility 7001R, User Manual

Page: 22 / 48

21
10 3.8 7.3
100 12 23
For the maximum rated output power of the transmitter not listed in the
table above, the recommended isolation distance d, in meters (m), can be
determined using the formula in the corresponding transmitter frequency
column, here P is the transmitter's maximum rated output power provided
by the transmitter manufacturer in watts (W).
Note 1: At frequencies above 80 MHz and 800 MHz, a higher frequency
range formula is used.
Note 2: These guidelines may not be suitable for all situations where
electromagnetic transmission is affected by the absorption and reflection
of buildings, objects and humans.
Follow the instructions below that you should be able to reduce the
chance of brakes out of control or the serious damage caused by the
electric wheelchair itself.
1) Do not turn on hand-held personal communication devices such as
citizens band (CB) radios and cellular phones while the powered
wheelchair is turned on.
(2) Be aware of nearby transmitters such as radio or TV stations and try
to avoid coming close to them.
(3) If unintended movement or brake release occurs, turn the powered
wheelchair off immediately to make sure of safety.
(4) Be aware that adding accessories or components, or modifying the
powered wheelchair, may make it more susceptible to interference from
radio wave sources. (Note: there is no easy way to evaluate the effect on
the overall immunity of the powered wheelchair).
(5) Report all incidents of unintended movement or brake release to the
powered wheelchair seller, and try to find out that whether there is radio
wave source nearby.