CULUS 1374093, Owner'S Manual

Page: 10 / 69

3. Remove one Phillips screw to
release the electrical box cov -
er in the bottom, right corner of
the fireplace (Figure 4).
4. Carefully remove the electrical
box cover from the fireplace
as wires are fed through the
strain reliefs on the cover and
are connected within.
CAUTION: Partially reflective
glass is not tempered. Do not
bump or drop the partially reflec -
tive glass to avoid breakage and
personal injury.
• Remove partially reflective
glass from fireplace.
2. Remove six Phillips screws
that fasten the media tray and
two screws that fasten the
front panel tabs (Figure 3).
Carefully remove both compo -
nents.
Fireplace Installation
Figure 5
Wires to
controls
Wire connectors
Junction
Box screw
Figure 6
Junction Box screws (3)
Figure 4
Electrical box
Screw
Figure 3
Front Panel
Front Panel tabs (2)
Media Tray screws (2)
10