background image

Normally, all water except the outside faucet lines and irrigation system water passes through the water 

filter. There are times when the water filter should be bypassed, Cul-Flo-Valv® By pass, or a 3-way 

bypass valve. You should bypass:

•  If lines to outside faucets do not bypass the water filter, and you do not want  

to waste filtered water on lawn sprinkling or other outside uses.

•  If you are going away on vacation and want to save water by not having  

the unit recharge while you’re away.

Medallist Plus Series Bypass Valve
Culligan Bypass Valve

In the back of Culligan water filters is a Cul-Flo-Valv

®

 Bypass. To bypass unit, simply turn the blue knob 

clockwise. To return to filtered water service, reverse the procedure—turn the blue knob counter-clockwise.

To BYPASS,  

turn the blue knob clockwise  

(see directional arrow on end of knob) 

until the knob stops as shown.
DO NOT OVERTIGHTEN!

To return to SERVICE,  

turn the blue knob counter-clockwise 

(see directional arrow on end of knob) 

until the knob stops as shown.
DO NOT OVERTIGHTEN!

About

1-1/4”

A screwdriver shank 

may be used in the 

slot as a lever for extra 

turning force if needed

Bypassed

Inlet

Outlet

About

1-1/4”

A screwdriver shank 

may be used in the 

slot as a lever for extra 

turning force if needed

Filtered Water

When & How 

to Bypass Your 

Water Filter

13

01035157 C 10/20

Summary of Contents for Medallist Plus Sulfur-OX3




















Reviews: