7
01021568
Total Capacity
TOTAL CAPACITY
743
GALLONS
The screen displays the total capacity setting (10–999999) for the filter,
which specifies how often the filter will initiate reconditioning based on
total flow, in gallons. When the total flow reaches total capacity, the filter
initiates reconditioning at the preset time.
NOTE Culligan recommends using REGEN INTERVAL
(Time Clock Backup) even if a meter is used to
inititate reconditioning.
Press
or
and then
to change the setting. Press
to ad-
vance to the next setting,
K-FACTOR
.
K-Factor
FLOW METER
80.00
PULS/GAL
The screen displays the K-factor for the flow meter setting. Press
to
keep the default setting and to complete the first time setup.
Completed First Time Setup
Initializing
JAN-01-13 12:01P
When the setup is complete, the circuit board microprocessor automati-
cally calculates filter capacity. The screen displays the initializing status
and the current date and time, and then transitions to the home screen.
FILTERING
JAN-01-13 12:01P
The screen displays the current state (the display alternates between Filter-
ing and any error) and the date/time set for the unit. This is the default
home screen.
The controller is designed to simplify the setup and installation process by making some default recom-
mendations during the Initial Setup. The default settings are designed to be appropriate for most common
installations.
