CULITEK MBD-2428 Instruction Manual Download Page 12

TWO YEAR WARRANTY

Culitek warrants to the original purchaser of this unit, the cabinet and all parts thereof, to be free from defects in material or workmanship, under normal use 

and service, for a period of two (2) years from the date of original purchase.
Any parts covered by this warranty that are examined and determined to have been defective within two (2) years of original purchase shall be repaired or 

replaced as stated below. Shall be deemed to have fully complied with its obligation under the foregoing warranties by electing either one of the following 

procedures

1. Furnishing a replacement part, freight collect, in even exchange for the returned part, freight collect.

2. Receiving the defective part, freight collect; repairing it; and returning it, freight collect.

ADDITIONAL THREE YEAR COMPRESSOR PART WARRANTY

 

In addition to the (2) two year warranty stated above, Culitek warrants its hermetically and semi-hermetically sealed compressor to be free from defects in 

both material and workmanship under normal use and service for a period of three (3) additional years from the date of original purchase but not to exceed 

five (5) years and three (3) months after shipment from manufacturer.
Compressors determined to have been defective within this extended time period will be either repaired or replaced with a compressor or compressor parts 

of similar design and capacity.
The three (3) year extended compressor warranty applies only to hermetically and semi-hermetically sealed parts of the compressor and does not apply 

to any other parts or components, including, but not limited to, cabinet, paint finish, temperature control, refrigerant, metering device, driers, motor starting 

equipment, fan assembly any other electrical component, etc.

R290 COMPRESSOR WARRANTY

 

The three year compressor warranty detailed above will be voided if the following procedure is not carefully adhered to:

1. This system contains R290 refrigerant and polyester lubricant. The polyester lubricant has rapid moisture absorbing qualities. If long exposure to

ambient conditions occur, the lubricant must be removed and replaced with new lubricant. Failure to comply with recommended lubricant specification

will void the compressor warranty.

2. Dryer replacement is very important and must be changed when a system is opened for servicing. Dryer must be used with XH-9 desiccant.

3. Micron level vacuums must be achieved to insure low moisture levels in the system. 500 microns or lower must be obtained.

WHAT IS NOT COVERED BY THIS WARRANTY

 

Obligation under warranty is limited to either repair or replacement of parts, subject to the additional limitations below. This warranty neither assumes nor 

authorizes any person to assume obligations other than expressly covered by this warranty.

1. WARRANTY IS NOT TRANSFERABLE. This warranty is not assignable and applies in favor of the original purchaser/user to whom delivered. Any such

assignment or transfer shall void the warranties herein made and shall void all warranties, express or implied, including any warranty of merchantability

or fitness for a particular purpose.

2. NO CONSEQUENTIAL DAMAGES. Not responsible for economic loss: profit loss or special, indirect, or consequential damages, including without

limitation, losses or damages arising from food or product spoilage claims whether or not on account of refrigeration failure.

3. ALTERATION, NEGLECT, ABUSE, MISUSE, ACCIDENT, DAMAGE DURING TRANSIT OR INSTALLATION, FIRE, FLOOD, ACTS OF GOD. Not

responsible for the repair or replacement of any parts that have been subjected after the date of manufacture to alteration, neglect, abuse, misuse,

accident, damage during transit or installation, fire, flood, or an Act of God.

4. NO IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. There are no other warranties, express, implied

or statutory, except the two (2) year warranty and the additional three (3) year compressor warranty as described above. These warranties are exclu-

sive and in lieu of all other warranties, including implied warranty and merchantability or fitness for a particular purpose. There are no warranties which

extend beyond the description on the face hereof.

5. TRANSPORTATION COSTS. Will accept parts covered under this warranty freight collect, provided that shipment has received prior approval. Not

responsible for any other transportation costs, but will ship freight collect parts either repaired or replaced under these warranties.

6. This equipment is intended for commercial use only and this warranty is void if equipment is used in a residential or non-commercial application.

This warranty covers products shipped into the 48 contiguous United States. Warranty coverage on products used in Hawaii, Alaska, Puerto Rico, and 

Canada cover parts only.

Equipment installed in/on a food truck or trailer will be limited to a period of 30 days from the original date of purchase.

WARRANTY CLAIMS & SERVICE

For all warranty claims please have the model number, serial number and a proof of purchase available. 

Phone: 1-800-325-1740

For all online warranty claims please include the model number, serial number and detailed description of the issue. 

Please attach a copy of your proof of purchase with your e-mail. 

E-Mail: [email protected]

WARRANTY

Refrigeration

Summary of Contents for MBD-2428













Reviews: