13
5. set the desired number of minutes by touching the or key.
6. When the time is set, it will begin to count down immediately. The display will
show the remaining time.
7. A signal sound will beep for 30 seconds and the timer indicator shows “ ”
when the setting time finished.
Setting the timer to turn one or more cooking zones off
If the timer is set on one zone:
1. Selecting the heating zone that you want to set timer.
2. Touch timer key, the digits will show in the timer display. and the “0” fi-
ashes.
3. Set the desired time in the control panel.
6. When the time is set, it will begin to count down immediately. The display will
show the remaining time.
NOTE
: The red dot next to power level indicator (eg. ) will illuminate indicat-
ing that the zone is in timer mode.
7. When cooking timer expires, the corresponding cooking zone will be switch off
automatically.
NOTE
: Other cooking zones will keep operating if they are turned on previously.
If the timer is set on more than one zone:
1. When you set the time for several cooking zones simultaneously, decimal
dots of the relevant cooking zones are on. The minute display shows the re-
maining time. The dot of the corresponding zone flashes (eg. ).
2. Once the countdown timer expires, the corresponding zone will switch off. Then
it will show the remaining activated timer and the dot of corresponding zone will
flash.
3. To check the remaining time set on a particular zone, touch the zone and the
corresponding timer will be shown in the timer indicator.
Cancel the timer
1. Select the zone that you want to cancel the timer.
2. Touch the timer key, the indicator will flash.
3. Set the timer to ”00”, the timer is cancelled.
